Specifications
Inlet flowrate – 10 L/min
Oxidation efficiency – >99% of propane
Solid particle loss – <40% at 100 nm
Operating gas temperature – 350°C
Outlet temperature – Ambient + 25°C
А catalytic stripper is a heated catalytic element used to remove the particle and gas-phase semi-volatile fraction of an aerosol.
Diesel, locomotive, and gas turbine exhaust contain a complex mixture of solid particles and semi-volatile material that is found in both the particle and the vapor phase. Physical and chemical characterization of these exhaust aerosols in the environment enables a better understanding of potential health effects, effectiveness of alternative combustion technologies and emission control devices, and the impact of new fuel and lubricant formulations on emissions. These measurements are enabled through the use of catalytic stripper (CS) technology.


Typical solid particle penetration curve
Features and benefits
- Robust measurement of solid material without re-nucleation artifacts
- High hydrocarbon oxidation efficiency
- Portable and easy-to-use
- No consumable parts
- Remote data logging option via USB-Interface (MODbus communication)
Applications
- Diesel exhaust measurements
- Gas turbine non-volatile particulate matter
- Solid particle concentration in ambient air
TO ORDER Model CS10
Specify |
Description |
STANDARD |
Bench top |
100V – 240 VAC | 50/60 Hz, 210 W max power consumption |
8 mm | Inlet/Outlet Swagelok compression tube fitting |
SS | Communication via USB 2.0 port (modbus communmication) |
Cooled outlet (ambient + 25°C) | |
H x W x D (mm) | 145 x 444 x 245 |
Weight (kg) | 7.6* |
**OPTIONAL** |
|
T | Custom outlet temperature |
CC | Custom size or formulation for oxidation catalyst |
1/4” | 1/4” Inlet/Outlet Swagelok compression tube fitting |
3/8” | 3/8” Inlet/Outlet Swagelok compression tube fitting |
АО | Analog out (0/4 to 20 mA) to monitor temperature via Sub-D 9-pin femail connector** |
B | Two buttons to change temperature setting on the unit |
RM | Rack mount version for 19″ racks |
*weights are approximate and subject to change **alternative to USB interface |